ME215082 Water Pump for Mitsubishi 4D34 4D34T Engine - Compatible with Fuso Canter FE FG Trucks, Rosa Bus, Kobelco SK160 & New Holland E160LC Excavator

Keep your Mitsubishi-powered equipment running at the correct operating temperature with this direct replacement Water Pump ME215082. Designed for 4D34, 4D34T, 4D33, 4D35, and 4D36 diesel engines, this critical cooling system component ensures proper coolant circulation in trucks, buses, and heavy equipment.Product SpecificationsProduct Type: Engine Water Pump with GasketOEM Part Numbers: ME215082, ME996868, ME015217, ME995426, ME995424Compatible Engines: Mitsubishi 4D33, 4D34, 4D34T, 4D35, 4D36 (Diesel)Compatible Vehicles: Fuso Canter FE439, FE449, FE639, FG639, FG649, FE70CB, FE71CBD, FE72CB/CE, FE73CB/CEV, FE82CEV, FE83CEV, FE537ET/637F, FG537BD/BT, FE516BN, FE518B/BN, FE517BN/537E/637EV, FE538EV/638EV/638F/648F, FE639EV/639F, FE649C/F, FE507B/BT, FE517B/BC/BD, FE508B, FE518BD, FE516B/BC/BD/BT, FE536E/636E, FE537B/EV, FE637C/E/ET, FE538B/E, FE638C/E, FE648C/E, FE639E/649E, FG538B/BD/BT, FG538E, FG638E, FE538C/658F, FE527E/ET, FE537BD, FE528E, FE538BD, FE548B/C/E, FE638EN/638G, FE658C/E, BE438F, BE459FCompatible Equipment: Kobelco SK160 Excavator, New Holland E160LC Excavator, Rosa Bus (1994-99)Housing Material: Cast Metal (Iron/Aluminum specification varies by application)Fuel Type: DieselCondition: Aftermarket Replacement PartInstallation: Direct replacement with included gasketPackage Contents1 x Water Pump Assembly1 x Mounting GasketNote: Mounting bolts, drive belt, and coolant are not included. Reuse original bolts if in good condition or purchase new hardware.⭐ Critical Pre-Purchase & Installation NotesPart Number Verification: Before ordering, locate the part number on your existing water pump or consult your equipment's service manual. This pump replaces ME215082 and its cross-references specifically. If your original pump has a different number, verify compatibility before purchasing.Installation Warning: Professional installation by a qualified diesel mechanic is strongly recommended. Always allow the engine to cool completely before beginning work. Drain the cooling system properly and dispose of old coolant according to local regulations. Clean the engine block mounting surface thoroughly before installing the new gasket. Use the correct type and mixture of coolant when refilling. After installation, run the engine with the radiator cap off to bleed air from the system, then check for leaks.Maintenance Note: When replacing the water pump, consider also replacing the drive belt, thermostat, and coolant as part of a comprehensive cooling system service. Inspect the radiator and hoses for signs of wear or corrosion at the same time.

• ⭐ [OEM Replacement] Water pump replaces Mitsubishi part numbers ME215082, ME996868, ME015217, ME995426, and ME995424, ensuring proper fitment for 4D34, 4D34T, 4D33, 4D35, and 4D36 diesel engines.
• ⭐ [Vehicle & Equipment Coverage] Compatible with Fuso Canter FE and FG series trucks (FE639, FE649, FG639), Rosa buses (1994-99), Kobelco SK160 excavators, and New Holland E160LC excavators equipped with these Mitsubishi engine platforms.
• ⭐ [Engine Cooling Component] Water pump circulates coolant from the radiator through the engine block and cylinder head, maintaining proper operating temperature and preventing overheating damage to your diesel engine.
• ⭐ [Durable Metal Construction] Built with cast metal housing and precision-engineered bearings and impeller, this water pump is designed for continuous operation under extreme conditions common in trucking and heavy equipment applications.
• ⭐ [Includes Mounting Gasket] This kit comes with the required water pump gasket, simplifying installation and ensuring a proper seal between the pump and engine block to prevent coolant leaks.